3 Surprisingly Easy Techno Bass

Start with a darker, smooth kick drum by shortening its length to allow space for tom hits. Use an EQ8 to roll off the highs for a darker tone, then add a synthesizer like Vital in mono mode.

• Apply a deep, dark filter to create the foundation • Position the sub bass in F to avoid overlapping with the kick's frequency range • Add sidechain compression from the kick to the sub bass for smooth transitions • Introduce a percussive tom sound to create groove and depth

Layer the tom hits at different times than the sub bass to create depth in the low end. Use EQ adjustments for authentication and apply drum bus or distortion to glue all elements together.

• Apply a slow attack, medium release glue compressor • Use a channel EQ for additional coloring • Result is a smooth, cohesive low-end foundation ready for additional elements

Take a drum brake sample from Peak Time Techno Kicks and stretch and bend it to create a rumble. Pitch it down to around 40-60Hz depending on desired depth, using a spectrum analyzer to find the sweet spot.

• Cut everything off with an EQ above the rumble frequency range • Duplicate the pitched sample for additional thickness • Add reverb at reduced stereo width and convert to mono with a utility • Apply distortion with an amp to add character

Freeze and flatten the audio to visualize imperfections that add authenticity. Manually edit and remove unwanted sections using a reversed fishbone technique. If desired, emphasize the kick's fundamental frequency with an additional EQ.

• Use Ozone's Exciter for brightness • Add tape saturation in the midrange area • Layer with percussions for complete texture • Result is a unique, unconventional rumble bass

Start with a beefy kick from Deborian Analog sample pack. Create a driving bass sound by pitching a synthesizer down one octave (-12). Build a simple envelope and activate the filter with envelope 2 for filter movement.

• Activate the noise oscillator to add texture • Use an authentic lead sound from your sample library • Ensure the synth plays different notes by clicking the appropriate button • Fix pitch by playing with the pitch parameter

Activate the filter and apply sidechain compression from the kick to create rolling, dynamic bass movement. Play multiple notes together to create a rolling, driving sound that complements the kick perfectly.

• Add slight distortion for character and bite • Apply reverb with a slight delay for space • Adjust the filter to add authenticity and movement • Process kick and bass together for cohesive sound